Parametric offers a wide range of flow measurement instruments from in-line, wetted, and clamp-on to portable and insertion flow meter solutions to optimize efficiency and profit maximization and remain in regulatory compliance. In a direct way, flow meters measure the flow rate, or quantity, of liquids, gases, and steam. These Flow Meters are designed to give you an accurate, reliable figure you can trust.
1. Liquid Flow Metes
The digital flow Family of Panametric Inline Liquid Flow Meters is a reliable and accurate advanced meter technology that can measure any gas or steam and works well in volatile environments.
The PanaMV vortex meter of Panametrics offers a multivariable design that contains shedding velocity with RTD temperature sensors and a solid-state pressure transducer for measuring the mass flow rate of steam, gases, and liquid.
The PanaMV vortex meter of Panametrics offers a multivariable design that contains shedding velocity with RTD temperature sensors and a solid-state pressure transducer for measuring the mass flow rate of steam, gases, and liquid.
The AquaTrans AT600 of Panametrics is a liquid clamp-on flow meter designed to be accurate, durable, and cost-effective. It is a rugged, cost-efficient, low-maintenance transmitter package that is ideal for water applications.The DigitalFlow DF868 of Panamterics is a fixed-installed liquid flow meter designed to measure energy and flow for all industries. It combines flow measurement capability with a cost-effective transmitter package that can be installed right at the process measurement point.
The portables line from Panametrics offers ultrasonic liquid and gas clamp-on flow meters. The TransPort PT878GC for gas; and the TransPort PT900 for liquid. These meters attach to pipe fixtures to measure the flow within the pipe. Quick installation and meter readings enable our users to continue their process without shutting down.
2. Gas Flow Meters
The Digital Flow F868 Gas Flowmeter from Panametrics is a highly versatile, high-performance flowmeter capable of many configurations with a large display and ample space for complicated wiring. Several options exist for I/O, including the ability to handle two flare lines with one box. They are ideally suited in Zone 2applications but can be fitted with a Zone 1 enclosure when required. Setup is simple through its large display and intuitive interface. The Digital Flow GF868 works with all Panametrics gas transducers and is backward compatible with all older model Panametrics meters, including the original 7100 and its digital replacement, the 7168.
The DigitalFlow of Panametrics CTF878 is a clamp-on gas flow meter designed for corrosive, toxic, high-purity, and sterile gas environments. It is highly accurate in measuring the flow of natural gas, compressed air, inert gas, and other gases. The correlation tag ultrasonic flow measurement technique allows this gas flow meter to read through any pipe, including those with lower pressures and higher velocities.
The portables line from Panametrics, offers ultrasonic liquid and gas clamp-on flow meters. The meter’s portability allows the device to move to numerous measurement locations, making it easy to spot-check the flow, verify other flow measurement instruments, or temporarily install the device.
